» Laboratory Furniture » Steel Lab Furniture » Reagent Shelf or Rack on Steel Laboratory Furniture(SF030)

Reagent Shelf or Rack on Steel Laboratory Furniture(SF030)


Model: JH-SF030

Reagent shelf or rack on steel laboratory furniture  is specially designed for increasing storage space. Normally central bench is necessary to add reagent shelf because wall mounted cabinets are not available to be made due to space limit. Then double layer regeant shelf is a good subsitute when underbench storage space isn’t enough.

Functions of Reagent Shelf  or Rack

1.  Storage and classification management

The reagent shelf is usually equipped with a multi-layer design, which can store different types of reagents and achieve rapid access through reasonable partitioning. For example, in chemical experiments, commonly used reagent racks use tempered glass shelves for easy identification and storage of items. ‌
safety protection.

2. Space optimization

Reagent racks are usually integrated into experimental platforms or independently set up. By adjusting the layer height and open design, they maximize the use of space and reduce the interference of reagent storage on the experimental process.

3. Safety protection

Some reagent racks are designed with anti drop structures (such as aluminum alloy anti drop racks) to prevent personnel injury or environmental pollution caused by reagent drops. Meanwhile, reagent racks are usually made of corrosion-resistant materials (such as epoxy resin coated steel plates) to adapt to laboratory acidic and alkaline environments.

Introduction of Reagent Rack in Laboratory

Material

Upright: made of 1.2mm thick cold-rolled or galvanized steel sheet coated with epoxy resin powder reaching curing temperature 220 celsius degree and thickness 60~80 um.

Shelf: 10mm thick tempered two-tires of glass suitable to put most kinds of chemicals or powder coated 1.0mm thick steel shelf.  Integrated stainless steel guardrails or aluminum alloy line to secure reagent bottles against accidental falls. Steel hanging pieces can be adjusted up and down at each 30mm.

Sockets: Multi-functional, British, US, European sockets etc for your options according to actual needs of clients. Installed either on columns or front side.

Installation

The  installation procedures are designed to be very simple. It can be finished perfectly only by using a screw knife. We can furnish CAD installation drawing and installation guidance for your reference.

In a word, two-tires reagent shelf or rack on steel central furniture or wall bench with has become standard configuration for increasing storing space under limited condition.

Dimension of Reagent Shelf

No Model Product Name Size: L*W*H(mm)
1 JH-SF030A Steel Rhombus Reagent Rack(luxious model) L*250*750, L*400*750
2 JH-SF030B Steel Normal Reagent Rack L*250*750, L*400*750
3 JH-SF030C Barrier L*250*750, L*400*750
Remark: L*250*750mm for wall lab bench, L*400*750mm for center bench.

Pictures of Various Reagent Racks:

Steel Rhombus Reagent Rack(luxious model)

Model: JH-SF030A

steel rhombus reagent rack with temperd glass

Steel Normal Reagent Rack

Model: JH-SF030B

reagent shelf of lab furniture

 

 

 

 

 

 

 

 

 

 

 

 

Steel Reagent Rack with Aluminum Barrier

Model: JH-SF030C

steel reagent rack with front sockets and aluminum barrier

FAQ for Laboratory Reagent Shelf

Q1: What is the load-bearing capacity of these shelves?

Engineered for high-density storage, the 10mm tempered glass tiers combined with reinforced steel uprights can safely support heavy chemical loads. The structure remains perfectly stable even when fully loaded on double-sided island benches.

Q2: Can the shelf height be adjusted for different bottle sizes?

Yes. The modular upright columns allow for vertical height adjustments. This flexibility enables you to customize the spacing between tiers to accommodate everything from small vials to large reagent containers, maximizing your lab’s storage efficiency.

Q3: Are the integrated sockets safe for chemical environments?

Absolutely. Our multi-functional sockets are strategically positioned on the columns or front side of shelf to prevent accidental contact with liquid spills. They provide convenient power access for stirrers and equipment while meeting international safety standards (British/US/EU) for laboratory use.

Q4: Are these reagent shelves only used on steel lab furniture?

These lab reagent racks are often applied on steel lab bench. Sometimes, these shelves can be also adopted on wood lab bench with steel frame as well according to clients requirements. Of course, it’s not suitable to be used on stainless steel lab bench or PP lab table because the materials do not match at all.

 

 

Maybe you like also

Enquiry Form ( we will get back you as soon as possible )

Name:
*
Email:
*
Phone:
*
Message:

Verification:
2 + 9 = ?
  • OUR COMPANY

    JIAHONG LABORATORY is a professional lab furniture and fume hood manufacturer & Supplier from China. We specialize in laboratory furniture and turnkey lab solutions.

  • CONTACT US

    0086-0510-83888695

    info@laboratoryfurnitures.net

    0086-15370203085

    noicle1

    Exclusive Representative In Brasil