Steel&Wood Laboratory Furniture Installation Guidance

Laboratory furniture installation is normally a complicated work because it needs precision and attention to detail during installation process. In most cases, it needs professional installation workers to perform this work.

Among all types of lab furniture, installation of lab bench with steel frame is the most complex due to the complicated structure for steel frame and crossbar. Glorylab developped unique steel connection parts for simplying the installation work and improove installaton working efficiency. Facts shows it suits the actual needs of foreign clients because they are capable of installation by themselves. Most of clients can install our lab benches by only using a screw knife, which can save their installaton cost and time effectively.

This guide provides a professional installation Steps to ensure durability and functionality in your workspace.

Tools for Installation of Laboratory Furniture

– Measuring tape

– Level

– Screwdriver set

– Rubber mallet

– Wood glue (for wooden components)

– Anchoring bolts (for stability)

Installation Steps for Wood&Steel Lab Work bench

Step 1: Unpack & Inspect Components

Carefully unpack all parts of your laboratory furniture, including steel frames, wooden tabletop, and hardware. Verify that all components match the assembly manual.

Step 2: Assemble the Steel Frame

1. Lay out the steel legs and crossbars.
2. Secure connections using provided bolts and particular quick-connection parts for both steel frame and crossbar, ensuring joints are tight.
3. Use a level to confirm the frame is even before proceeding.

Step 3: Attach the Lab Worktop

1. Apply wood glue to the steel frame’s support beams.
2. Place the lab countertop onto the frame, aligning it properly.
3. Secure with clamps for 30 minutes before final screw fastening.

Step 4: Stabilize the Lab Work Bench

1. If mounting to the floor, pre-drill holes and use anchoring bolts.
2. Check stability by applying gentle pressure—adjust if wobbling occurs.

Step 5: Final Inspection

Ensure all screws are tightened, and the lab bench is level. Wipe down surfaces to remove dust or adhesive residue.

Maintenance Tips

– Regularly check bolt tightness.

– Clean wooden surfaces with a damp cloth to prevent warping.

By following these steps, your laboratory furniture will be sturdy, functional, and long-lasting after installation work. Whether for research or industrial use, a well-installed lab work bench enhances efficiency and safety. If you need lab workbench with simple and quick installation, Glorylab is your priority.